Fachgruppe für Materialwissenschaft und Werkstofftechnik

Letzte Einträge:

2022-12-01 14:36	The Effectiveness of Cooled-Finger and Vacuum Distillation Processes in View of the Removal of Fe, Si and Zn from Aluminium Gotenbruck, M. ; Curtolo, D. C. ; Friedrich, S. ; Friedrich, B. Metals 12(12), Seiten/Artikel-Nr.:2027 DOI: 10.3390/met12122027 Journal Article 2022
2022-11-29 13:16	Special Issue "Advances in Understanding of Unit Operations in Non-ferrous Extractive Metallurgy 2023" Stopic, S. ; Friedrich, B. Metals : open access journal URL: https://www.mdpi.com/journal/metals/special_issues/Cheryl_understanding_unit_operations_non_ferrous_extractive_metallurgy_2023 Book 2022 & 2023
2022-11-29 12:56	Advances in Understanding of Unit Operations in Non-ferrous Extractive Metallurgy 2021 Stopic, S. ; Friedrich, B. Metals : open access journal DOI: 10.3390/books978-3-0365-4574-5 Book 2021
2022-11-28 11:36	Surface or Internal Fatigue Crack Initiation during VHCF of Tempered Martensitic and Bainitic Steels: Microstructure and Frequency/Strain Rate Dependency Krupp, U. ; Giertler, A. (Corresponding author) Metals : open access journal 12(11), Seiten/Artikel-Nr.:1815 DOI: 10.3390/met12111815 Journal Article/Contribution to a book 2022
2022-11-28 11:07	Synthesis of Complex Concentrated Nanoparticles by Ultrasonic Spray Pyrolysis and Lyophilisation Simić, L. ; Stopic, S. ; Friedrich, B. ; Zadravec, M. ; ; et al Metals : open access journal 12(11), Seiten/Artikel-Nr.:1802 DOI: 10.3390/met12111802 Journal Article/Contribution to a book 2022
2022-11-28 10:58	Data-mining of in-situ TEM experiments: On the dynamics of dislocations in CoCrFeMnNi alloys Zhang, C. ; Song, H. ; Oliveros, D. ; Fraczkiewicz, A. ; ; et al Acta materialia 241, Seiten/Artikel-Nr.:118394 DOI: 10.1016/j.actamat.2022.118394 Journal Article 2022
2022-11-23 14:40	Evaluation of the Bond Strength of Roll Clad Chromium-Boron Steel Composites for Hot Stamping Stennei, M. (Corresponding author) ; Ringel, A. R. ; Plum, T. ; Lohmar, J. ; ; et al Hot Sheet Metal Forming of High-Performance Steel, CHS² : 8th international conference: May 30thto June 2nd, 2022, Barcelona, Spain : proceedings / edited by: Prof. Mats Oldenburg (Luleå University of Technology, Sweden), Prof. Jens Hardell (Luleå University of Technology, Sweden), Prof. Daniel Casellas (Eurecat, Centre Tecnològic de Catalunya, Spain/Luleå University of Technology, Sweden), Seiten/Artikel-Nr: 445-452 Contribution to a book/Contribution to a conference proceedings 2022
2022-11-23 14:29	Perfekte Kombination - Inkrementelle Blechumformung (IBU) ermöglicht in Kombination mit Streckziehen völlig neue Möglichkeiten Bremen, T. (Corresponding author) Blech 03/2022, Seiten/Artikel-Nr.:42-44 Journal Article 2022
2022-11-22 11:38	Numerical prediction of machining induced residual stresses when hard cutting AISI 4140 Meurer, M. J. (Corresponding author) ; Tekkaya, B. ; Schraknepper, D. ; Bergs, T. ; ; et al Procedia CIRP 108, Seiten/Artikel-Nr.:583-588 Journal Article/Contribution to a conference proceedings 2022
2022-11-21 12:45	Numerical prediction of machining induced residual stresses when hard cutting AISI 4140 Meurer, M. J. (Corresponding author) ; Tekkaya, B. ; Schraknepper, D. ; Bergs, T. ; ; et al Procedia CIRP 108, Seiten/Artikel-Nr.:583-588 DOI: 10.1016/j.procir.2022.03.092 Journal Article (Review Article)/Contribution to a conference proceedings 2022

RWTH

RWTH Aachen - Startseite

Universitätsbibliothek

Kontakt

RWTH Publications

Allgemeines