% IMPORTANT: The following is UTF-8 encoded. This means that in the presence
% of non-ASCII characters, it will not work with BibTeX 0.99 or older.
% Instead, you should use an up-to-date BibTeX implementation like “bibtex8” or
% “biber”.
@PHDTHESIS{Leisten:1000381,
author = {Leisten, Christian},
othercontributors = {Abel, Dirk and Schelenz, Ralf},
title = {{S}imulation, {A}utomatisierung und
{H}ardware-in-the-{L}oop-{I}ntegration einer
{W}indenergieanlage auf einem {S}ystemprüfstand als
{F}orschungsplattform},
school = {Rheinisch-Westfälische Technische Hochschule Aachen},
type = {Dissertation},
address = {Aachen},
publisher = {RWTH Aachen University},
reportid = {RWTH-2025-00313},
pages = {1 Online-Ressource : Illustrationen},
year = {2024},
note = {Veröffentlicht auf dem Publikationsserver der RWTH Aachen
University 2025; Dissertation, Rheinisch-Westfälische
Technische Hochschule Aachen, 2024},
abstract = {This thesis presents a new kind of research platform at the
Center for Wind Power Drives at RWTH Aachen University for
the laboratory testing of wind turbines. It consists of a
state-of-the-art research wind turbine which is newly set up
and specifically automated. The platform is embedded in a
hardware-in-the-loop system on a system test bench and is
connected to a simulation model. It provides simple,
automated and reproducible testing under arbitrary
conditions in the laboratory. The major components, tower
and rotor, are removed and realistic loads are imposed on
the turbine on a test bench by a motor and a non-torque load
system. The original programmable logic control remains
active and missing components are being emulated by the
hardware-in-the-loop system. The virtual components of the
hardware-in-the-loop environment and the physically existing
ones can be exchanged as needed. The attached simulation
environment of both the turbine in the field and on the test
bench is also fully integrated, enabling virtual or physical
testing as required. The controls of both the turbine and
the test bench are fully accessible, which offers maximum
flexibility. Flexibility on the electrical side is provided
by a grid emulator. Due to the extensive instrumentation of
the turbine, particular insight into individual drive train
components is also possible.The system offers particular
advantages for the development process of wind turbines and
is recognized by the relevant committees, including for
certification. This allows for tests to be conducted much
earlier, faster and more regularly, leading to a more agile
development process. Research results can be freely
published as there are no commercial interests involved. The
hardware-in-the-loop system is modularly constructed so that
other wind turbines can be integrated with minimal effort. A
typical certification measurement campaign was conducted
with the presented platform and validated against field
data.},
cin = {416610},
ddc = {620},
cid = {$I:(DE-82)416610_20140620$},
pnm = {BMWi-0325799 - Belastungen an den Antriebskomponenten von
Windenergieanlagen (FVA-Gondel) (BMWi-0325799)},
pid = {G:(DE-82)BMWi-0325799},
typ = {PUB:(DE-HGF)11},
doi = {10.18154/RWTH-2025-00313},
url = {https://publications.rwth-aachen.de/record/1000381},
}
guest ::