h1

h2

h3

h4

h5
h6


001     1006938
005     20250404151558.0
024 7 _ |2 HBZ
|a HT030974494
024 7 _ |2 Laufende Nummer
|a 44100
024 7 _ |2 datacite_doi
|a 10.18154/RWTH-2025-02830
037 _ _ |a RWTH-2025-02830
041 _ _ |a English
082 _ _ |a 620
100 1 _ |0 P:(DE-588)1360848185
|a Kopsch, Markus
|b 0
|u rwth
245 _ _ |a Inorganic trace substances in a sorption enhanced gasification process and their removal
|c vorgelegt von Markus Alexander Kopsch
|h online
246 _ 3 |a Anorganische Spurenstoffe in einem sorptionsunterstützten Vergasungsprozess und ihre Entfernung
|y German
260 _ _ |a Aachen
|b RWTH Aachen University
|c 2024
260 _ _ |c 2025
300 _ _ |a 1 Online-Ressource : Illustrationen
336 7 _ |0 2
|2 EndNote
|a Thesis
336 7 _ |0 PUB:(DE-HGF)11
|2 PUB:(DE-HGF)
|a Dissertation / PhD Thesis
|b phd
|m phd
336 7 _ |2 BibTeX
|a PHDTHESIS
336 7 _ |2 DRIVER
|a doctoralThesis
336 7 _ |2 DataCite
|a Output Types/Dissertation
336 7 _ |2 ORCID
|a DISSERTATION
500 _ _ |a Veröffentlicht auf dem Publikationsserver der RWTH Aachen University 2025
502 _ _ |a Dissertation, Rheinisch-Westfälische Technische Hochschule Aachen, 2024
|b Dissertation
|c Rheinisch-Westfälische Technische Hochschule Aachen
|d 2024
|g Fak04
|o 2024-12-16
520 3 _ |a Die Energiebereitstellung durch Biomasse bzw. durch Biomasserückstände genießt derzeit aufgrund der Energiekrise hohe Akzeptanz in der deutschen Bevölkerung. Ein Prozess, welcher die Nutzung von Biomasserückständen als Brennstoffquelle für die Stromerzeugung ermöglicht, ist der derzeit im europäischen GICO-Projekt entwickelte Ca-Looping-Vergasungsprozess. In dieser Arbeit werden Modellierungs- und Versuchsergebnisse zum Freisetzungsverhalten anorganischer Spurenstoffe und zur Sorptionsmittelauswahl zusammengefasst, die zur Entwicklung eines geeigneten Heißgasreinigungskonzepts des Vergasers und Kalzinators verwendet werden können. Umfangreiche Gleichgewichtsberechnungen mit FactSage für den GICO Vergaser (650 °C) und Kalzinator (920 °C) belegen, dass Alumosilikate und Sr- und Ba-basierte Sorbentien die Konzentration von Alkali- und Sauergasen (H2S/SO2, HCl) auf Werte unter 1 ppmv reduzieren können. Kondensationsberechnungen betonen den Bedarf an temperaturbeständigen H2S-Sorbentien, da herkömmliche Sorptionsmaterialien, z. B. Zn2TiO4, zur Verdampfung neigen. Diese kann im späteren Prozess zur Kondensation von unerwünschten Salzen und Oxiden führen. Das Freisetzungsverhalten von anorganischen Spurenstoffen aus (un)behandelten Biomassen wurde mittels Molekularstrahl-Massenspektrometrie (MBMS) untersucht. Die Sorptionsgrenzen von Alumosilikaten, Erdalkali- und Seltenerdoxiden nach der Vergasung wurden in Festlaborbettuntersuchungen bei 650 °C mittels Massenspektrometrie (MS) bestimmt. Die Untersuchungen zeigen, dass Alumosilikate für die Alkalientfernung geeignet sind. H2S kann mittels CaO-stabilisierter SrO- und BaO-Sorbentien ausreichend reduziert werden. Die Konzentrationen werden jeweils unter 1 ppmv abgesenkt. Kompatibilitätsexperimente zwischen Filtermaterial (Al- und Ca-Mg-Silikat Fasern) und Sorbentien wurden durchgeführt, um eine mögliche Integration der Sorbentien in die Filterkerze zu untersuchen. Während Zn-Sorbentien in die Filterkerze integriert werden können, da sie nicht mit den Filterkerzenmaterialien reagieren, bilden sich bei Verwendung von Sr- und Ba-Sorbentien Aluminium- und Silikatphasen. Auf Grundlage der Modellierungsberechnungen, Freisetzungs-, Sorptions- und Kompatibilitätsexperimente werden schließlich chemische Heißgasreinigungskonzepte für verschiedene Sorptionsmittel vorgestellt.
|l ger
520 _ _ |a The energy supply by biomass, especially by biomass residues, currently enjoys high acceptance among the German population due to the energy crisis. A process that enables the use of biomass residues for power generation is the Ca-looping gasification process proposed in the European GICO-Project. This process requires a hot gas conditioning (HGC) unit for a gasifier and a calciner to remove inorganic trace substances. To this end, extensive equilibrium calculations with FactSage were conducted for the GICO gasifier (650 °C), and calciner (920 °C), showing that aluminosilicates, Sr-, and Ba-based sorbents could reduce the alkali, respectively sour gas (H2S/SO2, HCl) concentration to sub ppmv levels. Condensation calculations reveal the need for temperature-resistant H2S sorbents since conventional ones, e.g. Zn2TiO4, tend to evaporate, leading to the condensation of unwanted salts, and oxides. Since the release behavior of inorganic trace species and their adsorptive removal under gasification-like conditions between 650 °C and 700 °C has hardly been investigated, the experimental focus of this work is placed on the gasifier operating at 650 °C. The release behavior of inorganic trace substances from raw, water-leached, and hydrochar biomass samples was investigated using molecular beam mass spectrometry (MBMS). The sorption capacity of aluminosilicates, alkaline earth, and rare earths-based sorbents was determined by mass spectrometry (MS) in fixed bed lab-scale investigations. The investigations showed that aluminosilicates are suitable for alkali removal. Furthermore, the results indicate that Ca-stabilized Sr- and Ba-sorbents reduce H2S sufficiently. In both cases, concentrations could be brought below 1 ppmv. Compatibility experiments between filter material (Al- and Ca-Mg-silicate fibers) and sorbents were conducted to investigate the possibility of integrating the sorbents into the filter candles in order to allow a more compact HGC design. Since the Zn-sorbents are not reacting with the filter candle material, they can be integrated into the filter candle. However, aluminum- and silicate-phases are formed when using Sr- and Ba-based sorbents leading to potential risks such as the formation of cracks. Based on the modeling calculations, release, sorption, and compatibility experiments, chemical HGC concepts for different sorbents are proposed.
|l eng
536 _ _ |0 G:(EU-Grant)101006656
|a GICO - Gasification Integrated with CO2 capture and conversion (101006656)
|c 101006656
|f H2020-LC-SC3-2020-RES-RIA
|x 0
588 _ _ |a Dataset connected to Lobid/HBZ
591 _ _ |a Germany
653 _ 7 |a Ca-looping gasification process
653 _ 7 |a CaL
653 _ 7 |a FactSage
653 _ 7 |a GICO
653 _ 7 |a HGC
653 _ 7 |a sorption
700 1 _ |0 P:(DE-82)005492
|a Müller, Michael
|b 1
|e Thesis advisor
|u rwth
700 1 _ |0 P:(DE-82)987956
|a Peschel, Andreas
|b 2
|e Thesis advisor
|u rwth
856 4 _ |u https://publications.rwth-aachen.de/record/1006938/files/1006938.pdf
|y OpenAccess
856 4 _ |u https://publications.rwth-aachen.de/record/1006938/files/1006938_source.doc
|y Restricted
856 4 _ |u https://publications.rwth-aachen.de/record/1006938/files/1006938_source.docx
|y Restricted
856 4 _ |u https://publications.rwth-aachen.de/record/1006938/files/1006938_source.odt
|y Restricted
909 C O |o oai:publications.rwth-aachen.de:1006938
|p openaire
|p open_access
|p driver
|p VDB
|p ec_fundedresources
|p dnbdelivery
910 1 _ |0 I:(DE-588b)36225-6
|6 P:(DE-588)1360848185
|a RWTH Aachen
|b 0
|k RWTH
910 1 _ |0 I:(DE-588b)36225-6
|6 P:(DE-82)005492
|a RWTH Aachen
|b 1
|k RWTH
910 1 _ |0 I:(DE-588b)36225-6
|6 P:(DE-82)987956
|a RWTH Aachen
|b 2
|k RWTH
914 1 _ |y 2024
915 _ _ |0 StatID:(DE-HGF)0510
|2 StatID
|a OpenAccess
920 1 _ |0 I:(DE-82)413410_20140620
|k 413410
|l Lehrstuhl für Werkstoffe der Energietechnik (FZ Jülich)
|x 0
920 1 _ |0 I:(DE-82)057700_20231115
|k 057700
|l Forschungszentrum Jülich GmbH
|x 1
980 1 _ |a FullTexts
980 _ _ |a I:(DE-82)057700_20231115
980 _ _ |a I:(DE-82)413410_20140620
980 _ _ |a UNRESTRICTED
980 _ _ |a VDB
980 _ _ |a phd


LibraryCollectionCLSMajorCLSMinorLanguageAuthor
Marc 21