h1

h2

h3

h4

h5
h6


001     1011646
005     20250625165527.0
020 _ _ |a 978-3-948234-54-6
024 7 _ |2 HBZ
|a HT031147996
024 7 _ |2 Laufende Nummer
|a 44347
024 7 _ |2 datacite_doi
|a 10.18154/RWTH-2025-04636
037 _ _ |a RWTH-2025-04636
041 _ _ |a German
082 _ _ |a 620
100 1 _ |0 P:(DE-82)IDM02496
|a Kümpel, Alexander
|b 0
|u rwth
245 _ _ |a Adaptive agentenbasierte modellprädiktive Regelung für Gebäudeenergiesysteme
|c Alexander Kümpel
|h online , print
246 _ 3 |a Adaptive agent-based model predictive control for building energy systems
|y English
250 _ _ |a 1. Auflage
260 _ _ |a Aachen
|b E.ON Energy Research Center, RWTH Aachen University
|c 2025
300 _ _ |a 1 Online-Ressource : Illustrationen
336 7 _ |0 2
|2 EndNote
|a Thesis
336 7 _ |0 PUB:(DE-HGF)11
|2 PUB:(DE-HGF)
|a Dissertation / PhD Thesis
|b phd
|m phd
336 7 _ |0 PUB:(DE-HGF)3
|2 PUB:(DE-HGF)
|a Book
|m book
336 7 _ |2 BibTeX
|a PHDTHESIS
336 7 _ |2 DRIVER
|a doctoralThesis
336 7 _ |2 DataCite
|a Output Types/Dissertation
336 7 _ |2 ORCID
|a DISSERTATION
490 0 _ |a E.On Energy Research Center
|v 140
500 _ _ |a Druckausgabe: 2025. - Auch veröffentlicht auf dem Publikationsserver der RWTH Aachen University
502 _ _ |a Dissertation, RWTH Aachen University, 2024
|b Dissertation
|c RWTH Aachen University
|d 2024
|g Fak04
|o 2024-12-10
520 3 _ |a Zur Reduktion des Energieverbrauchs und der damit verbundenen Treibhausgasemissionen im Gebäudesektor ist ein energieeffizienter Gebäudebetrieb erforderlich. Ein hierfür vielversprechendes Verfahren ist die modellprädiktive Regelung (MPR), welche auf Basis eines mathematischen Modells die optimale Betriebsweise ermittelt. Die Vorteile der MPR sind ein vorausschauender Betrieb, Ausnutzung von Flexibilität, Mehrgrößenregelung und Berücksichtigung mehrere Zielgrößen. Die Entwicklung eines geeigneten Modells, das Einstellen und die Implementierung der MPR sind jedoch aufwendig und hemmen den breiten Einsatz im Gebäudebereich. Ziel dieser Arbeit ist es, durch einen adaptiven und modularen Ansatz eine selbsteinstellende modellprädiktive Regelung zu entwickeln, welche mit geringem Konfigurationsaufwand auf verschiedene Gebäudeenergiesysteme anwendbar ist. Hierdurch sollen die Hemmnisse für den Einsatz der MPR in der Praxis abgebaut werden. Die grundlegende Idee des Ansatzes ist die Einteilung des Energiesystems in wiederkehrende Subsysteme. Für die Regelung der Subsysteme wird ein hierarchischer agentenbasierter Ansatz verwendet, bei dem verschiedene Agenten die Subsysteme mittels adaptiver MPR regeln. Durch die adaptive MPR sind die Agenten auf typgleiche Subsysteme mit geringen Konfigurationsaufwand übertragbar. Zum effizienten Betrieb des Gesamtsystems wird ein Koordinator verwendet, der ein übergeordnetes Optimierungsproblem löst. Das Optimierungsproblem ist analog zu den Agentenmodular aufgebaut und verwendet einen wärmestrombasierten Ansatz. Die spezifischen Kostenfunktionen und Modellgleichungen des Optimierungsproblems werden von den einzelnen Agenten bestimmt und dem Koordinator übergeben. Der Koordinator bestimmt durch Lösen des übergeordneten Optimierungsproblems die Sollwerte für die einzelnen Subsysteme und übergibt diese an die Agenten. Zur Bewertung der Regelung wird ein Simulationsmodell, welches auf einem realen Gebäudeenergiesystem basiert, entwickelt. Für eine realitätsnahe Bewertung wird das Modell mit Messdaten kalibriert und validiert sowie die Regelung des Gebäudeenergiesystems als Referenz implementiert. Die Regelung von verschiedenen Subsystemen zeigt, dass die adaptiven Agenten gegenüber der Referenzregelung Energieeinsparungen und eine Verbesserung der Regelgüte ermöglichen und auf typgleiche Subsysteme übertragbar sind. Die Regelung des Gesamtsystems durch die agentenbasierte und adaptive MPR führt zu Kosteneinsparungen bis zu 59% bei gleichzeitig um bis zu 88% geringerer Verletzung von Temperatursollwerten. Zur Demonstration der Übertragbarkeit des Regelungskonzeptes auf reale Systeme wird das Energiesystem einer Versuchshalle geregelt. Die Regelung verhält sich analog zu den Simulationen und zeigt die Anwendbarkeit des Konzeptes in der Praxis auf.
|l ger
520 _ _ |a Reducing energy consumption and greenhouse gas emissions in the building sector requires energy efficient operation of buildings. One promising method is model predictive control (MPC), which uses a mathematical model to determine the optimal mode of operation. The advantages of MPC are predictive operation, exploitation of flexibility, multi-variable control, and consideration of multiple targets. The development of a suitable model, tuning, and implementation of MPC are expensive and inhibit its widespread use in the building sector. The objective of this work is to develop a self-adjusting model predictive control through an adaptive and modular approach, which can be applied to various building energy systems with low configuration efforts, to reduce the barriers of MPC for practical use. The basic idea of the approach is to divide the energy system into recurrent subsystems. A hierarchical agent-based approach is used to control the subsystems, where agents control the subsystems using adaptive MPC. Adaptive MPC allows the agents to be transferred to subsystems of the same type with little configuration effort. For efficient operation of the overall system, a coordinator is used to solve a high-level optimization problem. The optimization problem is modular, analogous to the agents, and based on a heat flux-based approach. The specific cost function and model equations of the optimization problem are determined by the individual agents and given to the coordinator. The coordinator determines the setpoints for the individual subsystems by solving the high-level optimization problem and passes them to the agents. A simulation model based on a real building energy system is developed to evaluate the developed control. For a realistic evaluation, the model is calibrated and validated with measurement data. Further, the control of the building energy system is implemented as a reference. In comparison to the reference control, the developed approach leads to a higher energy efficiency and an improved quality of control for the control of various subsystems. Furthermore, the agents are applicable to subsystems of the same type. The agent-based control of the overall energy system results in cost savings up to 59% while reducing the thermal discomfort by 88%. To demonstrate the transferability to real systems, the adaptive and agent-based control is applied to a test hall. The control leads to analogous behavior as in the simulation and shows the applicability of the concept in practice.
|l eng
588 _ _ |a Dataset connected to Lobid/HBZ
591 _ _ |a Germany
653 _ 7 |a Gebäudeenergiesysteme
653 _ 7 |a agent-based control
653 _ 7 |a agentenbasierte Regelung
653 _ 7 |a building energy systems
653 _ 7 |a model predictive control
653 _ 7 |a modellprädiktive Regelung
700 1 _ |0 P:(DE-82)IDM01533
|a Müller, Dirk
|b 1
|e Thesis advisor
|u rwth
700 1 _ |0 P:(DE-82)IDM03056
|a Abel, Dirk
|b 2
|e Thesis advisor
|u rwth
856 4 _ |u https://publications.rwth-aachen.de/record/1011646/files/1011646.pdf
|y OpenAccess
856 4 _ |u https://publications.rwth-aachen.de/record/1011646/files/1011646_source.zip
|y Restricted
909 C O |o oai:publications.rwth-aachen.de:1011646
|p openaire
|p open_access
|p VDB
|p driver
|p dnbdelivery
910 1 _ |0 I:(DE-588b)36225-6
|6 P:(DE-82)IDM02496
|a RWTH Aachen
|b 0
|k RWTH
910 1 _ |0 I:(DE-588b)36225-6
|6 P:(DE-82)IDM01533
|a RWTH Aachen
|b 1
|k RWTH
910 1 _ |0 I:(DE-588b)36225-6
|6 P:(DE-82)IDM03056
|a RWTH Aachen
|b 2
|k RWTH
914 1 _ |y 2025
915 _ _ |0 StatID:(DE-HGF)0510
|2 StatID
|a OpenAccess
920 1 _ |0 I:(DE-82)419510_20140620
|k 419510
|l Lehrstuhl für Gebäude- und Raumklimatechnik
|x 0
920 1 _ |0 I:(DE-82)080052_20160101
|k 080052
|l E.ON Energy Research Center
|x 1
980 1 _ |a FullTexts
980 _ _ |a I:(DE-82)080052_20160101
980 _ _ |a I:(DE-82)419510_20140620
980 _ _ |a UNRESTRICTED
980 _ _ |a VDB
980 _ _ |a book
980 _ _ |a phd


LibraryCollectionCLSMajorCLSMinorLanguageAuthor
Marc 21