h1

h2

h3

h4

h5
h6
http://join2-wiki.gsi.de/foswiki/pub/Main/Artwork/join2_logo100x88.png

Direct numerical simulation and modeling of carbon monoxide in turbulent premixed combustion with flame-wall interaction = Direkte numerische Simulation und Modellierung von Kohlenmonoxid in turbulenter vorgemischter Verbrennung mit Flamme-Wand Interaktion



Verantwortlichkeitsangabevorgelegt von Kai Andrew Niemietz

ImpressumAachen : RWTH Aachen University 2025

Umfang1 Online-Ressource : Illustrationen


Dissertation, Rheinisch-Westfälische Technische Hochschule Aachen, 2025

Veröffentlicht auf dem Publikationsserver der RWTH Aachen University 2026


Genehmigende Fakultät
Fak04

Hauptberichter/Gutachter
;

Tag der mündlichen Prüfung/Habilitation
2025-12-12

Online
DOI: 10.18154/RWTH-2025-10881
URL: https://publications.rwth-aachen.de/record/1023959/files/1023959.pdf

Einrichtungen

  1. Lehrstuhl und Institut für Technische Verbrennung (411410)

Projekte

  1. DFG project G:(GEPRIS)434872808 - DNS-gestützte Entwicklung von prädiktiven LES-Modellen für Schadstoffemissionen in Gasturbinen (434872808) (434872808)

Inhaltliche Beschreibung (Schlagwörter)
carbon monoxide (frei) ; direct numerical simulation (frei) ; flame-wall interaction (frei) ; large eddy simulation (frei) ; turbulent combustion (frei)

Thematische Einordnung (Klassifikation)
DDC: 620

Kurzfassung
Diese Arbeit präsentiert die Entwicklung eines Modells für Kohlenmonoxid (CO) Emissionen in Large-Eddy-Simulationen (LES) von Gasturbinenbrennern. Die Vorhersage von CO-Emissionen ist für die Entwicklung der nächsten Generation von Gasturbinenbrennern von entscheidender Bedeutung. Die Oxidation von CO erfolgt in der Regel auf viel längeren Zeitskalen als der Verbrennungsprozess selbst, was die Vorhersage von CO-Emissionen mit Modellen reduzierter Ordnung erschwert. Turbulenz-Chemie-Interaktionen (TCI), Flamme-Wand-Interaktionen (FWI) und Interaktionen mit Abgasen erhöhen die Komplexität der CO-Vorhersagen zusätzlich. Zunächst wurde eine direkte numerische Simulation (DNS) mit detaillierter Chemie von zwei parallelen turbulenten vorgemischten Methan-Luft-Strahlflammen durchgeführt, die mit isothermen Wänden interagieren. Die Simulation umfasst Bereiche mit hoher turbulenter Streckung und Rezirkulationszonen. Die Bedingungen sind ausgewählt, um die Verbrennung in Gasturbinen abzubilden. Die turbulente Streckung hat einen besonders großen Einfluss auf die CO-Bildungsphase, während die FWI und die daraus resultierenden langen Oxidationszeiten einen größeren Einfluss stromab der Flamme haben. Es wurden mehrere Varianten von Verbrennungsmodellen formuliert und analysiert. Alle Modelle sind Flamelet-Modelle mit tabellierter Chemie, die aus detaillierten Simulationen von 1D-Flammen zusammengestellt werden. Die Modelle wurden in LES implementiert und evaluiert. Ausgehend von einem einzigen vorgemischten laminaren Flamelet, wurde die Chemietabelle um einen Enthalpie-Term erweitert, um den Wärmeverlust an der Wand abzubilden, sowie Flamelets bei verschiedenen Streckungsraten, um die Auswirkungen turbulenter Streckung einzubeziehen. Zusätzlich wurden die Modelle mit einer CO-Transportgleichung kombiniert, um Transporteffekte zu berücksichtigen, die nicht in der Tabelle enthalten sind. Damit das tabellierte Chemie-Modell in der Lage ist, globale Flammeneigenschaften wie Flammenlänge und Brennstoffverbrauch genau zu reproduzieren, müssen Wärmeverluste an der Wand und die turbulente Streckung im Modell berücksichtigt werden. Um CO korrekt vorherzusagen, ist die zusätzliche CO-Transportgleichung erforderlich. Abschließend wurde ein Machine-Learning-Modell (ML-Modell) als Alternative zu den konventionellen chemischen Tabellierungsmethoden untersucht. Das ML-Modell kann die Ergebnisse der konventionellen Modelle reproduzieren und teilweise übertreffen.

This thesis presents the development of a model for carbon monoxide (CO) emissions in large eddy simulations (LES) of gas turbine combustors. The accurate prediction of CO emissions is essential for the design and development of the next generation of gas turbine combustors. The oxidation of CO typically occurs on much longer timescales than the main combustion process, which makes CO emissions difficult to predict with reduced-order models. Turbulence-chemistry interactions (TCI), interactions between the flame and the cold combustor walls (flame-wall interactions, FWI), and interactions with burnt gases further increase the complexity of CO predictions. First, a direct numerical simulation (DNS) with finite rate chemistry of two parallel turbulent premixed methane-air jet flames interacting with isothermal walls was performed. The simulation includes areas of high turbulent strain and regions of recirculated burnt gases. The flame conditions are carefully chosen to represent gas turbine combustion. The CO production and consumption in the turbulent flame differ strongly from the reaction rates in a premixed laminar flame. Turbulent strain is particularly influential in the CO formation stage upstream, while FWI and the resulting long oxidation time scales have a larger impact downstream in the post-flame region. Several variations of reduced-order combustion models were formulated and analyzed. All models are flamelet models with tabulated chemistry, compiled from detailed chemistry calculations of 1D flames. The models were implemented and evaluated in LES. Starting from a single premixed laminar flamelet, the chemistry table was extended with an enthalpy term to consider wall heat loss, and counterflow flamelets at various strain rates to include effects of turbulent strain. Additionally, the models were combined with a CO transport equation to predict transport effects not included in the table. The results show that the tabulated chemistry model is able to accurately reproduce global flame properties such as flame length and fuel flux, if both the wall heat loss and the turbulent strain are considered in the model. In order to predict CO correctly, the additional CO transport equation is necessary. Finally, a machine-learning (ML) model was evaluated as an alternative to the conventional chemistry tabulation methods. The ML model is able match and partially outperform the conventional models.

OpenAccess:
Download fulltext PDF
(additional files)

Dokumenttyp
Dissertation / PhD Thesis

Format
online

Sprache
English

Externe Identnummern
HBZ: HT031364742

Interne Identnummern
RWTH-2025-10881
Datensatz-ID: 1023959

Beteiligte Länder
Germany

 GO


OpenAccess

QR Code for this record

The record appears in these collections:
Document types > Theses > Ph.D. Theses
Faculty of Mechanical Engineering (Fac.4)
Publication server / Open Access
Public records
Publications database
411410

 Record created 2025-12-17, last modified 2026-01-10


OpenAccess:
Download fulltext PDF
(additional files)
Rate this document:

Rate this document:
1
2
3
 
(Not yet reviewed)