h1

h2

h3

h4

h5
h6
http://join2-wiki.gsi.de/foswiki/pub/Main/Artwork/join2_logo100x88.png

Yield modeling of agrivoltaic concepts = Ertragsmodellierung von Agrivoltaik Konzepten



Verantwortlichkeitsangabevorgelegt von Anna Clara Pauline Kujawa

ImpressumAachen : RWTH Aachen University 2026

Umfang1 Online-Ressource : Illustrationen


Dissertation, Rheinisch-Westfälische Technische Hochschule Aachen, 2026

Veröffentlicht auf dem Publikationsserver der RWTH Aachen University


Genehmigende Fakultät
Fak04

Hauptberichter/Gutachter
;

Tag der mündlichen Prüfung/Habilitation
2026-06-19

Online
DOI: 10.18154/RWTH-2026-06309
URL: https://publications.rwth-aachen.de/record/1038126/files/1038126.pdf

Einrichtungen

  1. Lehrstuhl für Solartechnik (DLR) (412910)

Inhaltliche Beschreibung (Schlagwörter)
AgriPV (frei) ; Einstrahlungsmodell (frei) ; Gewächshaus (frei) ; Pflanzenertrag (frei) ; Photovoltaik (frei) ; agrivoltaics (frei) ; crop yield (frei) ; greenhouse (frei) ; irradiance modeling (frei) ; photovoltaic (frei) ; ray-tracing (frei)

Thematische Einordnung (Klassifikation)
DDC: 620

Kurzfassung
Um den Klimawandel abzuschwächen, sind CO2-neutrale Energiequellen erforderlich. Großflächige Photovoltaikanlagen (PV-Anlagen) gelten als eine vielversprechende Technologie, da sie sich als umweltfreundliche, kostengünstige und zuverlässige Energiequelle bewährt haben. Mit dem exponentiellen Wachstum der weltweit installierten PV-Kapazitäten kam es zu direkten Landnutzungsänderungen, da PV-Anlagen auf Landflächen installiert wurden, die zuvor für die Nahrungsmittelproduktion genutzt wurden. Erneuerbare Energien stellen jedoch keine Bedrohung für die landwirtschaftliche Produktion dar, sondern können im Rahmen des Konzepts der Agriphotovoltaik (AgriPV) koexistieren. Diese Arbeit präsentiert die Entwicklung und Validierung einer Simulationsumgebung für AgriPV-Gewächshäuser. Das Modell ermöglicht die Simulation der Einstrahlung unter AgriPV-Bedingungen in Gewächshäusern und liefert eine Ertragsabschätzung. Das auf Raytracing basierende Strahlungsmodell konzentriert sich auf die Transmittanz durch Gewächshausabdeckungsmaterialien und PV-Module. Das Pflanzenmodell umfasst zwei verschiedene Ansätze. Der erste Ansatz basiert auf den täglichen Lichtintegralanforderungen (DLI) verschiedener Pflanzen. Der zweite Ansatz fokussiert sich auf Tomaten und verwendet ein funktional-strukturelles Pflanzenmodell (FSPM). Das Strahlungsmodell wurde sowohl anhand von Daten aus der Literatur als auch anhand von experimentell gemessenen Daten aus einem AgriPV-Gewächshausversuch validiert, der von September 2023 bis März 2024 durchgeführt wurde. Das Experiment wurde in einem "raspa y amagado"-Gewächshaus in Almería, Spanien, durchgeführt, wobei Abschattungen von 30% und 50% mit einer unbeschatteten Kontrollzone verglichen wurden. Der nRMSE der globalen Horizontalstrahlung beträgt 0,09 für die Kontrollzone, 0,18 für 30% Beschattung und 0,27 für 50% Beschattung. Für die literaturbasierte Validierung wurde ein AgriPV-Gewächshaus-Experiment vom Typ "Venlo" aus den Jahren 2014–2015 reproduziert, was zu einer Abweichung von 2,88 Prozentpunkten bei der simulierten Strahlungsreduktion über den gesamten Erntezyklus führte. Das Pflanzenmodell wurde ausschließlich mit Daten aus dem AgriPV-Gewächshaus-Experiment 2023–2024 validiert. Der nRMSE des Ertrages der DLI-Analyse für den simulierten Anbauzyklus betrug 0,10 für die Kontrollzone, 0,07 für 30% Beschattung und 0,06 für 50% Beschattung. Die Validierung des FSPM Ansatzes ergab einen nRMSE des Ertrages von 0,04 für die unbeschattete Kontrollzone und 0,07 für 30% Beschattung, während die Daten der 50% Zone zur Kalibrierung des Modells verwendet wurden. Die wirtschaftliche Bewertung des AgriPV-Gewächshauses ergab eine Gewinnsteigerung von +15% bei einer 30-prozentigen Dachabdeckung mit PV. Bei 50% Abdeckung stieg die Gewinnsteigerung auf 22%. Die entwickelte Simulationsumgebung bietet eine solide Grundlage für die Modellierung der Strahlungsverteilung in AgriPV-Gewächshäusern und die Bewertung ihrer Auswirkungen auf den erwarteten Ernteertrag. Das Modell kann in Zukunft als Grundlage für die Herleitung optimaler AgriPV-Gewächshausdesigns dienen, die an bestimmte Standorte, Klimabedingungen und Pflanzenarten angepasst sind.

To mitigate the ongoing climate change, carbon-neutral sources of energy are required. Large scale photovoltaic (PV) systems are considered one of the most promising technologies in this regard, as they have proven to be a green, cheap and reliable energy source. With the exponential growth of installed PV capacities worldwide, direct land-use changes have been triggered as ground-mounted PV systems have been installed on arable land formerly used for food production. However, renewable energy does not threaten agricultural production; indeed, they can coexist in the concept of agrivoltaics (APV). Describing the combination of agriculture and PV energy production on the same plot of land, APV is a promising solution when it comes to meeting the growing demand for both food and energy while also addressing land use conflicts. This thesis presents the development and validation of a simulation tool for APV greenhouses (GHs). The model enables the simulation of irradiance levels under APV conditions within GHs and gives an estimation of crop yield. The ray-tracing-based irradiance model focuses on mapping light transmission through GH cover materials and PV modules. The crop model includes two different approaches. One approach is based on daily light integral (DLI) requirements of different crops. The second approach focuses particularly on tomatoes and uses a functional-structural plant model (FSPM). The irradiance model was validated using both data from literature and experimentally measured data from an APV GH experiment performed from September 2023 to March 2024. The experiment was conducted in a "raspa y amagado" GH in Almería, Spain, and two roof cover ratios of 30% and 50% shading were compared against an unshaded control zone. The nRMSE of the global horizontal irradiance was determined to be 0.09 for the control zone, 0.18 for 30% shading and 0.27 for 50% shading using the irradiance data from the experiment. For the literature-based validation, a "Venlo"-type APV GH experiment from 2014–2015 was reproduced, resulting in a deviation of 2.88 percentage points in the simulated reduction in radiation over the entire crop cycle. The crop model was validated exclusively with data from the 2023–2024 APV GH experiment. The nRMSE of yield of the DLI analysis for the simulated crop cycle was 0.10 for the control zone, 0.07 for 30% shading and 0.06 for 50% shading. The validation of the FSPM approach yielded an nRMSE of dry weight of 0.04 for the unshaded control zone and 0.07 for the 30% shading zone, while the data from the 50% shading zone was used to calibrate the model. The economic assessment of the experimental APV GH showed a potential profit increase of +15% under the case of 30% of the GH roof covered with PV. For the 50% cover scenario, the economic profitability increased to 22% for one tomato crop cycle. The developed simulation tool provides a solid foundation for modeling the irradiance distribution within APV GHs and assessing its effects on expected crop yield. It can serve in the future as a basis for deriving optimal APV GH designs tailored to specific locations, climate conditions and crop types.

OpenAccess:
Download fulltext PDF
(additional files)

Dokumenttyp
Dissertation / PhD Thesis

Format
online

Sprache
English

Externe Identnummern
HBZ: HT031528785

Interne Identnummern
RWTH-2026-06309
Datensatz-ID: 1038126

Beteiligte Länder
Germany

 GO


OpenAccess

QR Code for this record

The record appears in these collections:
Document types > Theses > Ph.D. Theses
Faculty of Mechanical Engineering (Fac.4)
Publication server / Open Access
Public records
Publications database
412910

 Record created 2026-06-29, last modified 2026-07-24


OpenAccess:
Download fulltext PDF
(additional files)
Rate this document:

Rate this document:
1
2
3
 
(Not yet reviewed)