h1

% IMPORTANT: The following is UTF-8 encoded.  This means that in the presence
% of non-ASCII characters, it will not work with BibTeX 0.99 or older.
% Instead, you should use an up-to-date BibTeX implementation like “bibtex8” or
% “biber”.

@PHDTHESIS{Jauer:753829,
      author       = {Jauer, Lucas},
      othercontributors = {Poprawe, Reinhart and Gebhardt, Andreas},
      title        = {{L}aser {P}owder {B}ed {F}usion von {M}agnesiumlegierungen;
                      1. {A}uflage},
      school       = {RWTH Aachen University},
      type         = {Dissertation},
      address      = {Aachen},
      publisher    = {Apprimus Verlag},
      reportid     = {RWTH-2019-00868},
      isbn         = {978-3-86359-682-8},
      series       = {Ergebnisse aus der Lasertechnik},
      pages        = {1 Online-Ressource (II, 165 Seiten) : Illustrationen,
                      Diagramme},
      year         = {2018},
      note         = {Druckausgabe: 2018. - Auch veröffentlicht auf dem
                      Publikationsserver der RWTH Aachen University 2019;
                      Dissertation, RWTH Aachen University, 2018},
      abstract     = {The additive manufacturing process laser powder bed fusion
                      (LPBF) is increasingly used in industrial series production.
                      Compared to other production technologies, LPBF lacks the
                      range of commercially available materials. Magnesium alloys
                      represent one of these unavailable alloys. Nevertheless,
                      lightweight construction and medical applications would
                      strongly benefit from magnesium alloys being used with LPBF,
                      as magnesium alloys are the lightest structural metals and
                      feature both biocompatibility and biodegradability. However,
                      magnesium alloys are difficult to process with LPBF,
                      particularly because of the high vapor pressure at melting
                      temperature, since the interaction of laser radiation and
                      metal vapor can significantly reduce part quality. Within
                      the scope of this work, two suitable strategies for
                      processing magnesium alloys with LPBF are developed. After
                      selecting a suitable powder material, LPBF specimens made of
                      the alloys AZ91 and WE43are analyzed with regard to
                      microstructure and mechanical properties under static load.
                      For both alloys LPBF specimens exhibit a fine microstructure
                      with mostly equiaxed grains in the size of 1-3 μm. For both
                      tensile and compressive loads, strength and ductility are
                      significantly larger than for typical cast components. At
                      the end of this thesis, various technology demonstrators are
                      built to demonstrate the application-related feasibility of
                      LPBF with magnesium alloys.},
      cin          = {418710 / 053100},
      ddc          = {620},
      cid          = {$I:(DE-82)418710_20140620$ / $I:(DE-82)053100_20140620$},
      typ          = {PUB:(DE-HGF)11 / PUB:(DE-HGF)3},
      doi          = {10.18154/RWTH-2019-00868},
      url          = {https://publications.rwth-aachen.de/record/753829},
}