h1

h2

h3

h4

h5
h6
http://join2-wiki.gsi.de/foswiki/pub/Main/Artwork/join2_logo100x88.png

Combined LNT/SCR aftertreatment component concept for the reduction of nitrogen oxides from lean combustion engines = Ein kombiniertes LNT/SCR Abgasnachbehandlungskonzept für die Stickoxide von mager betriebenen Verbrennungsmotoren



Verantwortlichkeitsangabevorgelegt von İbrahim Can Özyalçin

ImpressumAachen : RWTH Aachen University 2023

Umfang1 Online-Ressource : Illustrationen


Dissertation, Rheinisch-Westfälische Technische Hochschule Aachen, 2023

Veröffentlicht auf dem Publikationsserver der RWTH Aachen University 2024


Genehmigende Fakultät
Fak04

Hauptberichter/Gutachter
;

Tag der mündlichen Prüfung/Habilitation
2023-10-26

Online
DOI: 10.18154/RWTH-2024-03224
URL: https://publications.rwth-aachen.de/record/981787/files/981787.pdf

Einrichtungen

  1. Lehrstuhl für Thermodynamik mobiler Energiewandlungssysteme und Institut für Thermodynamik (412310)

Projekte

  1. BMBF 13XP5042A - Effiziente DeNOx-Strategie für mager betriebene Verbrennungsmotoren (DeNOx) - Teilvorhaben: SCR- und H2-Katalysator, Charakterisierung und Modellbildung der Materialien (BMBF-13XP5042A) (BMBF-13XP5042A)
  2. EAGLE - Efficient Additivated Gasoline Lean Engine (724084) (724084)

Inhaltliche Beschreibung (Schlagwörter)
Abgasnachbehandlung (frei) ; NOx Nachbehandlung (frei) ; NOx Speicherkatalysator (frei) ; NOx aftertreatment (frei) ; NOx storage catalyst (frei) ; selektive katalytische Reduktion (frei) ; Simulation und Modellierung (frei) ; exhaust gas aftertreatment (frei) ; selective catalytic reduction (frei) ; simulation and modelling (frei)

Thematische Einordnung (Klassifikation)
DDC: 620

Kurzfassung
Sowohl die strengeren Emissionsvorschriften als auch die wachsende Komplexität des Motors der nächsten Generation und ihrer zugehörigen Abgasnachbehandlungssysteme erfordern einen synergetischen und ganzheitlichen Entwicklungsprozess des Katalysatorsystems. Eine effiziente Reduzierung der Stickoxidemissionen (NOx) unter mageren Bedingungen kann durch zwei Arten von Katalysatoren erreicht werden: Lean NOx Trap (LNT) und Selektiv Katalytische Reduktion (engl.: SCR). Eine vielversprechende DeNOx-Strategie wäre die Entwicklung eines Bauteils, das jede dieser Komponenten in einer Schichtstruktur kombiniert, da dies das Potenzial hat, den Betriebsbereich des Motors zu erweitern und die bisher funktionell getrennten DeNOx-Katalysatoren zur Reduzierung der NOx-Emissionen zu verschmelzen. In dieser Arbeit wird eine Katalysatorentwicklungsmethodik von der Materialherstellung bis zur Modellierung anhand von Erkenntnissen aus einem Laborgasprüfstand am Beispiel eines LNT/SCR-Doppelschichtkatalysators vorgestellt. Die Funktionsmaterialien eines LNT-Katalysators werden zuerst in Form von Granulaten hergestellt und verglichen. Das Ergebnis der Analyse der NOx-Speichermechanismen ist, dass ein infiltrierter Verbundwerkstoff mit Barium und Ceroxid eine vergleichbare NOx-Speicherung mit der Referenz bei niedrigen Temperaturen und eine höhere NOx-Speicherung bei Temperaturen über 350°C erreicht. Weitere Untersuchungen werden mit den Materialien zur Förderung der Wasser-Gas-Shift-Aktivität (WGS) durchgeführt. Die Bildung von Wasserstoff (H2) mittels WGS spielt eine wichtige Rolle für eine effiziente Regeneration des NOx-Speichers und eine höhere Ammoniakbildung (NH3). In diesem Zusammenhang werden standardmäßige Ceroxide und alternative Kupfer-Zink-Materialien (Cu-Zn) untersucht. Obwohl die Cu-Zn-Varianten in frischem Zustand eine vielversprechende Leistung zeigen, sind sie thermisch nicht stabil genug, um das Reduktionsmittel nach der Alterung schnell umzuwandeln. Zum besseren Verständnis der LNT/SCR-Doppelschichtkatalysatoren werden Minikatalysatoren mit verschiedenen Schichtarchitekturen hergestellt und getestet. Aufgrund des schrittweisen Aufbaus der Katalysatorproben kann der Einfluss jeder einzelnen Schicht einzeln berücksichtigt werden. Sowohl der LNT als auch der LNT+WGS-Katalysator zeigen eine vergleichbare NOx Speicherkapazität und eine hohe Selektivität für NH3. Eine hohe SCR-Beladung limitiert die Diffusion der NOx in die LNT-Schicht und bewirkt eine Reduzierung des NOx-Speichervermögens. Die weiteren LNT+SCR-Katalysatoren mit einer moderaten SCR-Beladung verbessern sowohl die NH3- als auch die N2O-Selektivität bei gleichbleibender NOx-Speicherung. Durch Untersuchungen am LNT+WGS und LNT+WGS+SCR Katalysator kann die Diffusionslimitierung der SCR-Schicht in Abhängigkeit von der Eintrittstemperatur quantifiziert werden. Mit Hilfe dieser Untersuchungen wird ein kinetisch basiertes LNT/SCR-Doppelschichtmodell zum besseren Verständnis der Wechselwirkungen innerhalb und zwischen den Schichten entwickelt. Die NH3-Bildung basiert hauptsächlich auf die LNT-Schicht während der fetten Phase. Das NOx- und NH3-Verhalten des Katalysators in Bezug auf Speicherung, Konvertierung und Schlupf kann im Modell bei verschiedenen Eintrittstemperaturen mit einer Abweichung von weniger als ± 15 % dargestellt werden. Alle diese Untersuchungen und Erkenntnisse führen zu einer Schlussfolgerung über die Anwendung und das Potenzial der LNT/SCR-Doppelschichtkatalysatoren.

As a result of the stricter future emission legislations and the increasing complexity of the next generation engines and their associated exhaust aftertreatment systems, a synergistic and holistic development process for the emissions aftertreatment system is required. An efficient reduction of the nitrogen oxides (NOx) emissions under lean conditions can be accomplished using two types of catalysts: the Lean NOx Trap (LNT) or a Selective Catalytic Reduction (SCR) component. A promising deNOx strategy would be to develop a component which combines both of these components in a layered structure as this has the potential to widen the operational capabilities of the engine and merges the previously functionally separated catalysts, enabling further reduction potential for NOx emissions under a greater range of operating conditions. Within this work, a catalyst development process is introduced which covers the requirements from material production to performance modelling created using findings from tests conducted at the laboratory gas test bench (LGB) on the example of an LNT/SCR dual layer catalyst. Various wash coat material components for an LNT catalyst were produced in granular form and ranked individually and in various combined blends. The analysis of the NOx storage mechanisms highlighted an infiltration composite contained Barium and Ceria achieves comparable NOx storage levels as the reference LNT at low temperatures and higher NOx storage at temperatures above 350°C. Additional investigations were carried out on the granules for water gas shift (WGS) activity promoting materials as the production of hydrogen (H2), via WGS, plays an important role for an efficient regeneration of the NOx storage and a higher ammonia (NH3) formation. Standard Ceria and alternative Copper (Cu) – Zinc (Zn) based materials were investigated, with the Cu-Zn variations showing a promising performance in a fresh state over comparison to the ceria doped alumina, however, they were not thermally stable enough to convert the reductant effectively after ageing. For a better understanding of the LNT/SCR dual layer catalysts, mini catalysts with various layouts were produced and tested. Owing to the stepwise build up of the catalyst samples, the influence of each layer can be considered. Both the LNT and LNT+WGS catalysts show comparable NOx storage performance and a high selectivity for NH3. A high SCR loading inhibited the diffusion of the NOx into the LNT layer and causes a decrease of the NOx storage capacity. LNT+SCR catalysts with a moderate SCR loading improves both NH3 and N2O selectivity while keeping the NOx storage comparable. Investigations on the LNT+WGS and LNT+WGS+SCR catalyst allowed the diffusion inhibition of the SCR layer to be quantified as a function of inlet temperature. Based on these investigations, a kinetic based LNT/SCR dual layer model was developed to analyze and simulate the interactions within and between the catalyst layers. The NH3 formation is considered mainly in the LNT layer during rich phase. The NOx and NH3 behavior of the catalyst in terms of storage, conversion and slip can be represented in the model with a deviation of lower than ± 15% at different inlet temperatures.

OpenAccess:
Download fulltext PDF
(additional files)

Dokumenttyp
Dissertation / PhD Thesis

Format
online

Sprache
English

Externe Identnummern
HBZ: HT030707302

Interne Identnummern
RWTH-2024-03224
Datensatz-ID: 981787

Beteiligte Länder
Germany

 GO


OpenAccess

QR Code for this record

The record appears in these collections:
Document types > Theses > Ph.D. Theses
Faculty of Mechanical Engineering (Fac.4)
Publication server / Open Access
Public records
Publications database
412310

 Record created 2024-03-14, last modified 2025-11-06


OpenAccess:
Download fulltext PDF
(additional files)
Rate this document:

Rate this document:
1
2
3
 
(Not yet reviewed)