2026
Dissertation, Rheinisch-Westfälische Technische Hochschule Aachen, 2026
Veröffentlicht auf dem Publikationsserver der RWTH Aachen University
Genehmigende Fakultät
Fak04
Hauptberichter/Gutachter
;
Tag der mündlichen Prüfung/Habilitation
2026-06-18
Online
DOI: 10.18154/RWTH-2026-07182
URL: https://publications.rwth-aachen.de/record/1039408/files/1039408.pdf
Einrichtungen
Thematische Einordnung (Klassifikation)
DDC: 620
Kurzfassung
Zur Bekämpfung des globalen Klimawandels wurden im Verkehrssektor innerhalb der letzten Jahre alternative Antriebstechnologien entwickelt und in den Markt eingeführt. Während insbesondere die Automobilindustrie mit der Einführung elektrifizierter Antriebe einen fundamentalen Wandel durchläuft, gibt es andere Mobilitätsmärkte die bislang nur in geringem Maße elektrifiziert sind. Einer dieser Märkte ist das Segment der Powersports-Fahrzeuge. Dort werden größtenteils konventionelle Antriebe mit Verbrennungsmotoren und riemenbasierten stufenlosen Getrieben eingesetzt. Im Rahmen dieser Arbeit wird ein Hybridantrieb untersucht, welcher sich durch eine geringe Systemkomplexität auszeichnet. Zur Reduktion der Fertigungskosten wird auf den Einsatzaktiver Aktuatoren verzichtet, was funktionale Einschränkungen bedingt. Ziel der Arbeit ist die experimentelle Untersuchung des Potentials des Hybridsystems in Bezug auf Funktionsumfang und Effizienzvorteile im Vergleich zu einem konventionell angetriebenen Fahrzeug. Da Fahrverhalten und Funktionsumfang des Hybridantriebs maßgeblich von der mechanischen Ausgestaltung beeinflusst werden, wird zunächst die Antriebsauslegung des zur experimentellen Untersuchung aufgebauten Erprobungsfahrzeugs hergeleitet. Eine besondere Herausforderung bei der Integration des Hybridsystems in den Versuchsträgerstellt die Laststeuerung des Verbrennungsmotors dar, da diese nicht durch das Hybridsystemsondern ausschließlich durch den Fahrer erfolgt. Um dennoch einen hohen Fahrkomfort und eine möglichst umfangreiche Hybridfunktionalität zu erreichen, ist die Steuerung des Hybridsystems entscheidend. Die dazu implementierten Softwarefunktionen werden ebenfalls vorgestellt. Anhand verschiedener Fahrversuche wird das Potential des Antriebs experimentell untersucht. Das Hybridsystem bietet in der untersuchten Ausgestaltung eine vollumfängliche Hybridfunktionalität mit der Möglichkeit rein elektrischen Fahrens, sowie einer in den untersuchten Zyklen ausgeglichenen Ladebilanz. Bei Versuchen auf einem Abgasrollenprüfstand kann eine signifikante Effizienzsteigerung nachgewiesen werden. Insbesondere der fehlende Eingriff auf die Steuerung des Verbrennungsmotors bedingt jedoch funktionale Einschränkungen, wodurch das Hybridsystem nicht sein volles Potential ausschöpfen kann. Abschließend werden Maßnahmen diskutiert welche den Funktionsumfang des Antriebs weitersteigern können, ohne Systemkomplexität und Kosten entscheidend zu erhöhen.To address global climate change, alternative propulsion technologies have been developed and introduced to the market in the transport sector in recent years. While the automotive industry in particular is undergoing fundamental change with the introduction of electrified powertrains, there are other mobility markets that have only been slightly electrified so far. One of these markets is the powersports vehicle segment. This segment largely uses conventional drivetrains with internal combustion engines and belt-based continuously variable transmissions. This thesis examines a hybrid powertrain that is characterised by low system complexity. To reduce manufacturing costs, no active actuators are used, which, however, leads to functional limitations. The purpose of this thesis is to experimentally investigate the potential of the hybrid powertrain in terms of its functionality and efficiency advantages compared to a conventionally powered vehicle. Since the driving characteristics and functionality of the hybrid powertrain are significantly affected by its mechanical design, the first step is to derive the powertrain layout of the demonstrator vehicle built for the experimental investigation. A particular challenge in integrating the hybrid system into the vehicle, is the load control of the internal combustion engine, as this is not controlled by the hybrid control unit but exclusively by the driver. In order to achieve a high level of driving comfort and the most comprehensive hybrid functionality possible, the control software of the hybrid system is crucial. The software functions that are implemented for this purpose are also presented. The potential of the drive system is being investigated experimentally in various driving tests. In the configuration being analysed, the hybrid system offers full hybrid functionality with the option of purely electric driving and a neutral charge balance in the examined test cycles. Tests on an roller chassis dynamometer demonstrate a significant increase in efficiency. However, the lack of access to the internal combustion engine control system in particular results infunctional limitations, which prevent the hybrid system from reaching its full potential. Finally, measures are discussed that could further increase the functionality of the hybrid powertrain, without significantly increasing the complexity and costs of the system.
OpenAccess:
PDF
(zusätzliche Dateien)
Dokumenttyp
Dissertation / PhD Thesis
Format
online
Sprache
German
Externe Identnummern
HBZ: HT031553605
Interne Identnummern
RWTH-2026-07182
Datensatz-ID: 1039408
Beteiligte Länder
Germany
|
The record appears in these collections: |