2007
Aachen, Techn. Hochsch., Diss., 2007
Genehmigende Fakultät
Fak06
Hauptberichter/Gutachter
Tag der mündlichen Prüfung/Habilitation
2007-02-23
Online
URN: urn:nbn:de:hbz:82-opus-19309
URL: https://publications.rwth-aachen.de/record/62439/files/DaDalt_Nicola.pdf
Einrichtungen
Inhaltliche Beschreibung (Schlagwörter)
Phasenregelkreis (Genormte SW) ; Ingenieurwissenschaften (frei) ; Bang-Bang (frei) ; Digital (frei) ; PLL (frei)
Thematische Einordnung (Klassifikation)
DDC: 620
Kurzfassung
In dieser Dissertation ist die Theorie und die Implementierung eines integrierten digitalen Bang-Bang Frequenzsynthesizers für Anwendungen im Bereich schneller serieller Datenübertragungssysteme dargestellt.Die Synthesizerarchitektur ist durch einen Binären Phasen Detektor (BPD), einen Digital Schleifenfilter und einen Digitalgesteuerten LC Oszillator (DCO) mit einer programmierbaren Spule gekennzeichnet. Die Analyse der nichtlinearen Dynamik des Systems basiert sowohl auf der Analyse der Trajektorie des Systems in einer passenden „Phase Plane“, als auch auf einem linearisierten Modell. Die Linearisierung der Schleife ist durchgeführt worden, indem man einen stochastischen Ansatz und Markov Kettentheorie verwendete. Eine digitale Methode für die Stabilisierung der Übertragungsfunktion, die auf nicht-parametrischer Schätzung basiert, ist in dieser Dissertation zusammen mit einer möglichen Implementierungsform vorgeschlagen worden. Der analytische Ansatz ist durch Simulationen des Synthesizers mit Matlab und VHDL Modellen überprüft worden. Ein Prototyp des Synthesizers ist in Infineon’s 130nm CMOS Technologie implementiert und gemessen worden. Die Messungen stimmen sehr gut mit der Theorie und den Software-Modellen überein. Hervorragende Jitter performance von 600fs bis zu 650fs ist gemessen worden. Diese Dissertation beweist, dass ein voll-integrierter, voll-digitaler Ansatz an die Low-Jitter Frequenzsynthese auch mit Bang-Bang Regelung in CMOS Technologie möglich ist, und dass die nichtlineare Dynamik mit grosser Genauigkeit analytisch behandelt werden kann.In this thesis the theory and implementation of a digital bang-bang frequency synthesizer for application in the field of high speed serial data communications systems is presented. As major building blocks, the synthesizer architecture features a Binary Phase Detector (BPD), a Digital Loop Filter and a Digitally Controlled LC Oscillator (DCO) with a programmable coil in order to cover three different frequency domains. A framework is provided for the nonlinear analysis of the dynamics of the system, based on an analysis of the trajectories of the system in an appropriate phase plane. This approach allowed the derivation of the conditions for stability also in presence of latency in the loop and for input modulation tolerance, and provided insights into the output clock jitter performance. The phase-plane based nonlinear analysis could not be usefully exploited in the presence of jitter on the reference clock and of thermal noise in the synthesizer’s internal blocks, so that a linearized model for the synthesizer has been developed. The linearization of the loop (and in particular of the BPD) has been carried out by using a stochastic approach and by making use of Markov Chain theory. The linearized model has been used to compute the phase transfer function parameters like peaking and bandwidth and the noise generation performances of the synthesizer. Whether the nonlinear model or the linearized one has to be used for the analysis of the synthesizer depends on the amount of noise in the system. A value for this noise threshold has been derived in this work. The architecture proposed has the drawback that the input-output transfer function is dependent on the input jitter. A digital method for the stabilization of the transfer function based on non-parametric estimation has been proposed in this thesis together with a possible implementation form. Throughout the whole work, the analytical approach has been escorted by simulations of synthesizer using software models written in Matlab and in VHDL. The agreement between theory and model is very good for all realistic conditions of operation. A prototype for the synthesizer has been implemented on silicon using a 130nm CMOS technology. The measurements are in very good agreement with the theory and the software models. Outstanding jitter performance of 600fs to 650fs has been measured. This thesis proves that a fully integrated all-digital approach to the low-jitter frequency synthesis is possible also with high bandwidth bang-bang loops in CMOS technology, and that the theory describing the dynamics, jitter generation and jitter tolerance is known to a high degree of accuracy. The results of this work have been published in 4 articles on international journals and conferences (ESSCIRC, ISSCC, IEEE Journal of Solid-State Circuits, IEEE Trans. on Circuits and Systems). A fifth article has been accepted for publication on IEEE Trans. on Circuits and Systems.
Volltext:
PDF
Dokumenttyp
Dissertation / PhD Thesis
Format
online, print
Sprache
English
Externe Identnummern
HBZ: HT015295583
Interne Identnummern
RWTH-CONV-124008
Datensatz-ID: 62439
Beteiligte Länder
Germany